Freezing the screen

1. Press the FREEZE button on the remote control.

The “FREEZE” indication will appear on the screen, and the projector will enter the FREEZE mode.

Operating

POSITION AUTO

 

MAGNIFY

VOLUME

ON

 

FREEZE

MUTE

OFF

 

To exit the FREEZE mode and restore the screen to normal, press the FREEZE button again.

KEYSTONE ONE TOUCH

●The projector automatically exits the FREEZE mode when the input signal changes, or when one of the projector’s buttons or the remote control buttons of STANDBY/ON, ONE TOUCH, RGB, VIDEO, BLANK, AUTO,ASPECT, VOLUME, MUTE, KEYSTONE, POSITION and MENU is pressed.

●If the projector continues projecting a still image for long time, the LCD panel might possibly be printed. Do not leave the projector in FREEZE mode for too long.

Temporarily blanking the screen

Press the BLANK button on the remote control.

 

DOWN

1. The blank screen will be displayed instead of the screen

 

PAGE

 

 

of input signal. Please refer to the item BLANK of section

BLANK

LASER

SCREEN menu (35).

 

 

To remove the blank screen and return to the input signal screen, press the BLANK button again.

●The projector automatically returns to the input signal screen when the input signal changes, or when one of the projector’s buttons or the remote control buttons except the disk pad including the center button for the left click or the right mouse button is pressed.

21