Multifunctional settings

VIDEO Qlty. Menu

With the VIDEO Qlty. menu, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.

 MENU [RGB]   :SELECT

 PICTURE  PROGRESSIVE  TURN OFF

 IMAGE  3D‑YCS       TURN OFF  VIDEO Qlty.  VIDEO NR     LOW

 INPUT

 SETUP

 SCREEN

 OPTION

 NETWORK

 EASY MENU

Item

Description

 

 

 

Using the buttons ▲/▼ switches the progressive mode.

 

TV FILM TURN OFF

 

• This function performs only at an interlaced signal of a VIDEO

 

input, a S-VIDEO input or a COMPONENT VIDEO input of 525i

PROGRESSIVE

(480i) or 625i (576i) signal.

• When the TV or FILM is selected, the screen image will be crisper.

 

 

The FILM mode is adaptable to the 2-3 Pull-Down system to the

 

conversion. But these may cause a certain defect (for example,

 

jagged line) of the picture at a quick moving object. In such a case,

 

please select the TURN OFF, even though the screen image may

 

lose the crisp.

 

Using the buttons ▲/▼ switches the 3D-YCS mode.

 

STILL IMAGE NORMAL TURN OFF

3D-YCS

• This function performs only at a VIDEO input of NTSC 3.58.

• NORMAL is the mode for images with a lot of motions like movies,

 

and STILL IMAGE is the mode for images with few motions or

 

completely still ones like slides.

 

• When this function performs, the VIDEO NR function is ineffective.

 

Using the buttons ▲/▼ switches the noise reduction mode.

 

HIGH MIDDLE LOW

• This function performs only at a VIDEO input or a S-VIDEO input.

VIDEO NR At a VIDEO input of NTSC 3.58, this function performs only when the TURN OFF is selected under the 3D-YCS.

•When the HIGH, the MIDDLE or the LOW is selected, the noise on screen is reduced according to each mode.

•When this function is excessive, it may cause a certain degradation of the picture.

31