Multifunctional settings

IMAGE Menu

With the IMAGE menu, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.

 MENU [RGB]   :SELECT

 PICTURE  ASPECT         4:3

 IMAGE  OVER SCAN      95  VIDEO Qlty.  V POSITION     25

 INPUT  H POSITION     142

 SETUP  H PHASE        16

 SCREEN  H SIZE         1344

 OPTION  AUTO ADJUST EXECUTE  NETWORK

 EASY MENU

Item

Description

 

 

 

Using the buttons ▲/▼ switches the mode for aspect ratio.

 

At a RGB/DVI signal

 

4:3 16:9 NORMAL

 

At a video signal / no signal

ASPECT

4:3 16:9 SMALL

 

 

• The NORMAL mode keeps the original aspect ratio of the signal.

 

• At a HDTV signal of 1125i (1080i) or 750p (720p) of COMPONENT

 

VIDEO input, this item can't be selected.

 

• Performing the automatic adjustment initializes the aspect ratio

 

setting.

 

Using the buttons ▲/▼ adjusts the over-scan ratio.

OVER SCAN

Large (It reduces picture) Small (It magnifies picture)

• This item can be selected only at a video signal.

 

• When this adjustment is too large, certain degradation may appear

 

at the frame area of the picture. In such a case, please adjust small.

V POSITION

Using the buttons ▲/▼ adjusts the vertical position.

Up Down

 

This item is not selected when DVI-D input port is selected.

H POSITION

Using the buttons ▲/▼ adjusts the horizontal position.

Left Right

 

This item is not selected when DVI-D input port is selected.

 

Using the buttons ▲/▼ adjusts the horizontal phase to eliminate

 

flicker.

H PHASE

Right Left

• This item can be selected only at a RGB signal or a component

 

 

video signal. Note that this does not work with the input signal of

 

525i(480i)/625i(576i) from the component video port.

29