Multifunctional settings
Item | Description |
|
|
| Using the buttons ▲/▼ switches the mode for the start up screen. |
| The start up screen is the screen displayed when no signal or an |
| unsuitable signal is detected. |
| MyScreen ORIGINAL TURN OFF |
MyScreen is the screen you can register a desired screen.
START UP ORIGINAL screen is the existing standard screen. When the TURN OFF is selected, the BLACK screen is used.
•To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLANK screen after several minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it will change to the BLACK screen.
•For the MyScreen, please refer to the item MyScreen below. About the BLANK screen, please refer to the item BLANK (35).
| This item functions for capturing the MyScreen of the blank screen | |
| and the start up screen. Please execute displaying the input | |
| including the picture you want to capture. | |
| 1. Selecting this item displays a dialog titled “MyScreen”. It will ask | |
| you if you start capturing the picture from the current screen. | |
| Please wait for the target picture to be displayed, and press the | |
| ENTER button on the remote control when the picture is display. | |
| The picture will freeze and the frame for capturing appears. | |
| To stop performing, press the RESET or ESC button on the | |
| remote control. | |
My Screen | 2. Using the buttons ◄/►/▲/▼ adjust the frame position. Please | |
move the frame to the position of the picture which you want to | ||
| ||
| use. | |
| To start registration, press the ENTER button on the remote | |
| control. | |
| To restore the screen and return to the previous dialog, press the | |
| RESET or ESC button on the remote control. | |
| Registration takes several minutes. When the registration is | |
| completed, the registered screen and the message “MyScreen | |
| registration is finished.” are displayed for several seconds. If the | |
| registration failed, the message “A capturing error has occurred. | |
| Please try again.” is displayed. | |
| Using the buttons ▲/▼ turns on/off the MyScreen lock function. | |
My Screen Lock | TURN ON TURN OFF | |
When the TURN ON is selected, the item MyScreen cannot be | ||
| ||
| performed. Use this function for protecting the current MyScreen. |
36