Multifunctional settings

EASY Menu

With the EASY MENU, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table.

 EASY MENU

 ASPECT             4:3  MODE             NORMAL

 BRIGHT+0

 CONTRAST+0

 COLOR+0

 TINT+0

 SHARPNESS+3

 WHISPER          NORMAL

 MIRROR           NORMAL

 RESET            

 FILTER TIME         0

 LANGUAGE         ENGLISH  Go To Advance Menu...

Item

Description

 

 

ASPECT

Using the buttons ◄/► switches the mode for aspect ratio.

See the item ASPECT of section IMAGE menu (29).

 

 

Using the buttons ◄/► switches the mode of picture type. The

 

modes of picture type are combinations of a mode of GAMMA and

 

a mode of COLOR TEMP. Choose a suitable mode according to the

 

projected source.

 

NORMAL CINEMA DYNAMIC

NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)

MODE CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT) DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)

When the combination of GAMMA and COLOR TEMP differs

from pre-assigned modes above, the display on the menu for the MODE is “CUSTOM”. Please refer to the items GAMMA (26) and COLOR TEMP (27) of PICTURE menu.

When this function is performed, a certain extra such as a line may appear.

BRIGHT

Using the buttons ◄/► adjusts the brightness.

See the item BRIGHT of section PICTURE menu (26).

 

CONTRAST

Using the buttons ◄/► adjusts the contrast.

See the item CONTRAST of section PICTURE menu (26).

 

COLOR

Using the buttons ◄/► adjusts the strength of whole color.

See the item COLOR of section PICTURE menu (27).

 

TINT

Using the buttons ◄/► adjusts the tint.

See the item TINT of section PICTURE menu (27).

 

SHRPNESS

Using the buttons ◄/► adjusts the sharpness.

See the item SHARPNESS of section PICTURE menu (27).

 

WHISPER

Using the buttons ◄/► turns off/on the whisper mode.

See the item WHISPER of section SETUP menu (34).

 

24