Storage subsystem management methods
Before you configure the storage subsystem, determine which method of storage
subsystem management you want to use. Youcan manage the storage subsystems
in either of two ways: host-agent (in-band) management or direct (out-of-band)
management.
For more information about setting up in-band or out-of-band management
connections, refer to the DS Storage Manager Installation and Host Support Guide
for the operating system of the host computer that will be used to manage the
storage subsystem.
Important: If the operating system of the host server that the storage subsystem
logical drives are mapped to is not Microsoft Windows 2000 or Server
2003, then you have to make a direct (out-of-band) management
connection to the storage subsystem to set the correct host type first.
Then, the server will be able to recognize the storage subsystem
correctly for host-agent (in-band) management.

Host-agent (in-band) management method

This method requires host-agent software that you install on the host server. The
host-agent software allows the DS Storage Manager client program to manage the
DS5020 storage subsystem using the same Fibre Channel connections between the
host server and the storage subsystem. Youmust install at least one management
station and a software agent host. The management station can be the host or a
workstation on the Ethernet network. Amanagement station will have the client
software installed. Figure 52 shows the host-agent (in-band) management method.
5
4
Twostorage
subsystems
Twostorage
subsystems Ethernet
network
Ethernet
network
Host
server
Management
station
FibreChannel
Figure52. Host-agent (in-band) managed storage subsystems
80 IBM System Storage DS5020 Storage Subsystem: Installation, User’s, and Maintenance Guide