IBM specifications EP-8KTA Features

EP-8KTA Features

Section 2

FEATURES

EP-8KTA Features:

•EP-8KTA is based on the AMD Socket A Processors operating at 600 ~ 1GHz on Socket A.

•Designed with VIA KT133 AGPset.

•Supports up to 768MB of DRAM (minimum of 32 MB) on board (please see Section 3-2).

•EP-8KTA will support Error Checking and Correcting (ECC) when using parity SDRAM memory modules. This will detect multiple bit errors and correct 1-bit memory errors.

•Supports (1) 16 bit ISA slots, (6) 32 bit PCI slots, (1) 4X AGP slot and provides (2) independent high performance PCI IDE interfaces capable of supporting PIO Mode 3/4 and Ultra DMA 33/66 devices.

The EP-8KTA supports (6) PCI Bus Master slots and a jumperless PCI INT# control scheme which reduces configuration confusion when plug ging in PCI card(s).

•Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary IDE interfaces.

•Designed with on chip Multi I/O: (1) floppy port, (1) parallel port (EPP, ECP), and (2) serial ports (16550 Fast UART).

Note: Japanese “Floppy 3 mode” is also supported

•Features Award Plug & Play BIOS. With Flash Memory you can always upgrade to the current BIOS as they are released.

•EP-8KTA utilizes a Lithium battery which provides environmental protection and longer battery life.

Page 2-1