If you are using theACPI operating system, only the
low-battery alarm is available.
Tocause the computer to return from standby mode and
resume operation, do one of the following:
vPress the Fn key.
vOpen the LCD cover.
vTurnon the power switch.
Also, the computer automatically returns from standby
mode and resumes operation in either of the following
events:
vThe ring indicator (RI) is signaled by a serial device or a
PC Card device (Windows 2000 does not support the
ring indicator (RI) resume by PC Card device.)
vThe time set on the resume timer elapses. In Windows
98, the Scheduled Taskssetting takes priority over the
Resume on timer selection in the “Power Management
Properties”window.
Note: The computer does not accept any input
immediately after it enters standby mode. Waita
few seconds before taking any action to reenter
operation mode.
Hibernation mode
Note for Windows NT
If you are using Windows NT in NTFS format, you
cannot create a hibernation file. If you want to use
hibernation mode, you will need to reinstall Windows
NT with FATformat.
Note for OS/2
If you are using OS/2 in the default format, HPFS,
you cannot create a hibernation file. If you want to
use hibernation mode, you will need to reinstall
OS/2 with FATformat.
In hibernation mode, the following occurs:
vThe system status, RAM, VRAM, and setup data are
stored on the hard disk.
vThe system is powered off.
Note: If the computer enters the hibernation mode while it
is docked to the docking station, do not undock it
from the docking station before resuming normal
operation. If you do undock it and then try to
Relatedservice information
General descriptions 33