rfifosize | 0x1000000 | receive fifo size | False |
rpoolsize | 0x02000000 | IP receive pool size | True |
spoolsize | 0x02000000 | IP send pool size | True |
3.0 Tunables and settings for AIX 5L
Several settings in AIX 5L impact the performance of the HPS. These include the IP and memory subsystems. The following sections provide a brief overview of the most commonly used tunables. For more information about these subjects, see the AIX 5L tuning manuals listed in section 7.0.
3.1 IP tunables
When defining subnets for HPS links, it is easier to debug performance problems if there is only one HPS interface for each IP subnet. When running with multiple interfaces for each subnet, applications do not typically control which interface is used to send or receive packets. This can make connectivity problems more difficult to debug. For example, the RSCT cthats subsystem that polls interfaces to assert connectivity might have problems identifying which interfaces are down when multiple interfaces are on the same IP subnet.
The IP subsystem has several variables that impact IP performance over HPS. The following table contains recommended initial settings used for TCP/IP. For more information about these variables, see the AIX 5L manuals listed in section 7.0.
Parameter | Setting |
|
|
sb_max | 1310720 |
|
|
tcp_sendspace | 655360 |
|
|
tcp_recvspace | 655360 |
|
|
rfc1323 | 1 |
|
|
tcp_mssdflt | 1448 |
|
|
ipforwarding | 1 |
|
|
3.2 File cache
AIX 5L defines all virtual memory pages allocated for most file systems as permanent storage pages. Files mapped from the GPFS file cache are an exception. A subset of permanent storage pages are further defined as client pages (such as NFS and JFS2 mapped files). All permanent storage pages can be referred to as the file cache. The size of the file cache tends to grow unless an increase in computational page allocations (for example, application data stored in memory) causes the operating system to run low on available virtual memory frames, or the files being memory mapped become unavailable (for example, a file system becomes unmounted).
pshpstuningguidewp040105.doc | Page 9 |
