Removing and replacing a FRU

This section presents directions and drawings for use in removing and replacing a FRU. Be sure to observe the following general rules:

1.Do not try to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts.

2.Before replacing any FRU, review “FRU replacement notices” on page 58.

3.Begin by removing any FRUs that have to be removed before the failing FRU. Any such FRUs are listed at the top of the page. Remove them in the order in which they are listed.

4.Follow the correct sequence in the steps for removing the FRU, as given in the drawings by the numbers in square callouts.

5.When turning a screw to replace a FRU, turn it in the direction as given by the arrow in the drawing.

6.When removing the FRU, move it in the direction as given by the arrow in the drawing.

7.To put the new FRU in place, reverse the removal procedure and follow any notes that pertain to replacement. For information about connecting and arranging internal cables, see “Locations” on page 138.

8.When replacing a FRU, use the correct screw as shown in the procedures.

DANGER

Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables.

Attention: After replacing a FRU, do not turn on the computer until you have made sure that all screws, springs, and other small parts are in place and none are loose inside the computer. Verify this by shaking the computer gently and listening for rattling sounds. Metallic parts or metal flakes can cause electrical short circuits.

Attention: The system board is sensitive to, and can be damaged by, electrostatic discharge. Before touching it, establish personal grounding by touching a ground point with one hand or by using an electrostatic discharge (ESD) strap (P/N 6405959).

62ThinkPad SL400 and SL500Hardware Maintenance Manual

Page 69 Page 71
Page 70
Image 70
IBM SL500 manual Removing and replacing a FRU
Page 69 Page 71

SL500 specifications

The IBM SL500 is a notable entry in the realm of high-capacity tape libraries, designed for organizations that require efficient data backup, archiving, and management solutions. It stands out due to its robust feature set, innovative technologies, and the capability to evolve with an organization's growing data needs.

One of the principal features of the IBM SL500 is its modular architecture, allowing businesses to start with a basic configuration and expand as their requirements grow. This scalability is crucial in accommodating increasing data volumes without requiring a complete system overhaul. The library supports a variety of tape formats, including the IBM LTO (Linear Tape-Open) technology, known for its high capacity and reliability.

The SL500 also integrates advanced features like a user-friendly graphical interface for monitoring and managing tape operations. This interface simplifies administrative tasks and provides real-time insights into the system's performance, allowing IT professionals to manage data more efficiently. Additionally, the SL500 comes equipped with automated handling capabilities, such as robotic arms that minimize manual intervention, thus reducing the risk of human error and improving operational efficiency.

In terms of scalability, the SL500 supports multiple drive configurations and slots for cartridges, which can house thousands of tape cartridges, enabling organizations to tailor the system to their unique data storage needs. It can include up to 10 tape drives and house more than 7,000 cartridges, offering a massive storage capacity that is both reliable and secure.

The library's robust security features further enhance its appeal. It includes data encryption capabilities to protect sensitive information stored on tapes, ensuring compliance with various regulatory standards. Moreover, its integration capabilities with IBM Spectrum Protect and other data protection software allow organizations to streamline their backup and recovery processes.

Another significant aspect of the SL500 is its energy-efficient design. IBM has incorporated energy-saving features in the library, reducing operational costs and environmental impact. This forward-thinking approach reflects a growing need within data management solutions to balance performance with sustainability.

In summary, the IBM SL500 is an advanced tape library system that combines scalability, automation, security, and energy efficiency. With its various features and capabilities, it is an appealing choice for businesses seeking to enhance their data management strategies while accommodating future growth.
Top Page Image Contents