Step 4

750TLV and 750THV Models

Pull the battery module out of the uninterruptible power supply; the battery connector will discon- nect from port.

Battery

Connector

1000TLV and 1000THV Models A.

Pull the battery module from the uninterruptible power supply until the battery cables are visible. Disconnect the battery cable terminals.

Battery

Terminals

1500TLV and 1500THV Models A.

Pull the battery module from the uninterruptible power supply until the back of the module is flush with the outer edges of the uninterruptible power supply.

B.

Remove the battery module from the uninterrup- tible power supply.

B.

Disconnect the battery connector.

REPLACING THE BATTERY MODULE

To replace the battery module, reverse the directions for Removing the Front Bezel and Battery Module.

Attention: 1000TLV and 1000THV models only: When reconnecting the battery cables, connect cables to the correspond- ing color terminals.

12

Page 16
Image 16
IBM UPS750THV, UPS750TLV, UPS1500TLV, UPS1000TLV, UPS1000THV, UPS1500THV manual Battery Connector, Battery Terminals