Battery Connection
The battery connector is located on the rear panel (See Con- necting Equipment and Power to the Uninterruptible Power Supply).
For battery connection, push the connector into the corre- sponding port.
Connecting Equipment and Power to the Uninterruptible Power Supply
REAR PANEL
| 750TLV |
|
| 750THV |
| 1000TLV AND | 1000THV AND |
| |||||
| MODEL |
|
| MODEL |
| 1500TLV |
| 1500THV |
| ||||
|
|
|
|
|
| 4 | MODELS |
| MODELS |
| |||
1 | 2 | 3 4 | 5 | 1 | 2 | 2 11 5 | 3 | 6 | 2 11 | 5 | 6 | ||
5 | |||||||||||||
6 |
| 8 | 9 |
| 7 |
| 9 |
| 4 | 12 |
| 8 | 9 | 4 | 12 | 7 | 10 | 9 |
7 | 6 | 10 |
|
| 7 |
| ||||||||||||
|
|
|
| 1 | ||||||||||||||
INDEX |
| ITEM |
|
|
|
| DESCRIPTION |
| 1 |
|
|
|
|
|
|
| ||
1 & 2 |
|
| USB Port & Serial Port |
|
|
| Power management software and either USB or serial port commu- |
| ||||||||||
|
|
|
|
|
|
|
| nication with the uninterruptible power supply can be used. Use only |
| |||||||||
|
|
|
|
|
|
|
| cables supplied or approved by IBM. |
|
|
|
|
|
|
| |||
3Site Wiring Fault LED
4TVSS Screw
Use the supplied serial cable to connect to the serial port. DO NOT use a standard serial interface cable since it is incompatible with the uninterruptible power supply connector.
Important: Serial and USB ports cannot be used simultaneously.
750TLV, 1000TLV and 1500TLV models only: See Troubleshooting.
The uninterruptible power supply features a transient voltage surge- suppression (TVSS) screw for connecting the ground lead on surge suppression devices such as telephone and network line protectors.
When connecting a grounding cable, disconnect the unit from the utility power outlet.
5 | Smart Slot | See Startup. |
6 | Battery Connector | See Battery Connection. |
7 | Outlet Banks | Connect equipment. |
8 | Input Cord | 750TLV, 1000TLV and 1500TLV models only: See Startup. |
9 | Circuit Breaker | See Troubleshooting. |
10 | Input Connector | 750THV, 1000THV and 1500THV models only: See Startup. |
11Voltage Sensitivity Button and 1000TLV, 1000THV, 1500TLV and 1500THV models only: See User
LED | Configurables. |
12Telephone/Network Surge Sup- 1000TLV, 1000THV, 1500TLV and 1500THV models only: For tele-
pression Ports | phone/network surge suppression, connect a single line telephone or | ||
| a | ||
| phone/network surge protection port, | , on the back of the unin- | |
| terruptible power supply. Connect from the | port with sup- | |
| plied telephone or network cabling to a fax modem or network port. | ||
5
