3. Projecting an Image (Basic Operation)

￿Turning off the Projector

To turn off the projector:

First, press the POWER (ON/STAND BY) button on the projector cabinet or the POWER OFF button on the remote control. The “Power Off / Are you sure?” message will appear.

Secondly, press the ENTER button or press the POWER (ON/STAND BY) or the POWER OFF button again.

The power indicator will glow orange. After the projector turns off, the cooling fans keep operating for 30 seconds (Cooling-off time).

Immediately after turning on the projector and displaying an image, you cannot turn off the projector for 60 sec- onds.

Finally, turn off the Main Power switch.The power indicator will go out.

LAMP

 

 

STATUS

 

 

POWER

VIDEO

S-VIDEO COMPUTER-1 COMPUTER-2

SELECT

ON/STAND BY

AUTO

ADJ.

OFF

ON

 

 

POWER

 

MAGNIFY PIC-MUTE PAGE

 

 

UP

 

 

DOWN

 

MENU

 

 

ENTER

EXIT

 

L-CLICK

R-CLICK

 

Power On

Fan running

Standby

LAMP

LAMP

LAMP

STATUS

STATUS

STATUS

POWER

POWER

POWER

Steady green light

Blinking

Steady orange

 

orange light

light

CAUTION

Do not unplug the power cable from the wall outlet or do not turn off the main power under any one of the following circumstances. Doing so can cause damage to the projector:

• While the Hour Glass icon appears.

• While the cooling fans are running. (The cooling fans continue to work for 30 seconds after the projector is turned off)

￿After Use

Preparation: Make sure that the projector is turned off.

1.Unplug the power cable.

2.Disconnect any other cables.

3.Retract adjustable tilt feet if extended.

4.Cover the lens with the lens cap.

5.Put the projector and its accessories in the supplied soft carrying case.

29