IBM W2H, 31x User-definable font set, Font size At the all language X20--XFF 2. Font size English

11-9-2005	Input/output device commands
Ps	Mode
0 (X'30')	Reset display mode. Characters written after this command are reset
	to normal display mode.
5 (X'35)'	Blinking mode. Characters written after this command blink ON and
	OFF every 0.3 seconds.
7 (X'37')	Reverse mode. Characters written after this command are reversed.

User-definable font set

1B 5C 3F 4C 57 Pf 3B Pn 3B Pc 3B Pd...Pd

Purpose:

This command specifies a user-definable font set. The control bytes embedded in the command sequence (represented by Pf, Pn, and Pc in the preceding command format), change the font characteristics. Pd...Pd represents the font data bytes.

Pf (font size)	1	(X'31'):		5x7		dots			(ANK)
	2	(X'32'):		8x16			dots
	3	(X'33'):		16x16			dots
Pn (font number)	1	∼ 32	(X'31'			∼ X'33', X'32') Pf=1, 2
	1	∼ 16 (X'31' ∼ X'31', X'36') Pf=3
Pc (registration	2	hex	digits		Pf=1,				2
address)	4	hex	digits		(Pf=3)
Pd...Pd	2 hex		digits		x	7		Pf=1
	2	hex	digits		x	16			Pf=2
	2	hex	digits		x	2		x	16 Pf=3

Note: All data is stored into RAM. You must issue this command every time you switch ON the power.

Available registration address can be established as follows:

1.Font size 5x7

At the all language X'20'--X'FF'

2.Font size 8x16

English

X'01'--X'FF' (except X'08', X'0A', X'OD', X'1B')

Japanese

X'20'--X'7F', X'A0'--X'DF'

Korean, Simplified Chinese and Traditional Chinese X'20'~ X'A0'

3.Font size 16x16

Japanese JIS X 0208-1990 (Font selection X'1B', X'53', X'31') X'8140'--X'81FF',X'8240'--X'84FF' (Positions X'8200'--X'823F' are not available.)

X'8840'--X'88FF', X'8940'--X'9FFF' (Positions X'8900'--X'893F' are not available.) X'E040'--X'E0FF', X'E140'--X'EAFF' (Positions X'E100'--X'E13F' are not available.)

Korean KS C 5601-1992 (Font selection X'1B', X'53', X'32') X'A1A0'--X'A1FF',X'A2A0'--X'ACFF' (Positions X'8200'--X'829F' are not

Appendix A. Input/output device commands A-13