Icom IC-GM1600, IC-GM1600E SECTION 3 DISASSEMBLY INSTRUCTIONS, E A, Note:, 7!2.), ).%6%2, 1Unscrew 1 nut G, 5Remove 1 washer K, 3Unscrew 2 screws D, 2Unscrew 2 screws H

SECTION 3 DISASSEMBLY INSTRUCTIONS

•REMOVING THE REAR PANEL1Remove the speaker panel A.2Unscrew 2 screws B, and remove 2 washers C.3Unscrew 2 screws D.4Unscrew 2 screws E, and remove 2 washers F.5Remove the rear panel and the main seal from the front panel.

Note: When replacing the screws, 10–12 kg of torque MUST be applied to ensure water resistance.

B

C

Rear panel

D

)# - 0 3

Main seal

Front panel

F

E A

R 7!2.).'
).%6%2 ATTEMPT TOMREMOVE THE SPEAKER PANEL USING YOUR FINGER NAILS THISSMAYNRESULTLINJURLY 5SE A FLATFHEAD SCREW DRIVER OR A SIMILAR FLAT INSTRUMENT

•REMOVING THE CHASSIS UNIT1Unscrew 1 nut G.2Unscrew 2 screws H.3Take off the chassis unit in the direction of the arrow.4Unplug the connector I and the cable J from the chassis unit.5Remove 1 washer K.

•REMOVING THE MAIN UNIT1Unscrew 9 screws L.2Unsolder 2 points M, and take off the main unit in the direction of the arrow.

L

L

K

G

F

Chassis unit H

L

Main unit

M

I

Front panel

Chassis unit

3 - 1