Icom IC-M505 instruction manual DSC Operation, Mmsi code programming

■MMSI code programming

The 9-digit MMSI (Maritime Mobile Service Identity: DSC self ID) code can be programmed at power ON.

This code programming can be performed only once.

qTurn power OFF.

wWhile pushing [MENU], turn power ON to enter MMSI

code programming condition.

eAfter the display appears, release [MENU]. r Push [MENU] again to enter the DSC menu.

t Rotate [CHANNEL] to select “Set up,” push [CHAN- NEL•ENTER].

--DSC Menu-- Select Item

Position Input Received Calls

˘Set up Exit

yRotate [CHANNEL] to select “MMSI Check,” push [CHANNEL•ENTER].

--DSC Menu--

Set up

Add:INDV ID

Add:Group ID

DEL:INDV ID

DEL:Group ID

Offset Time

˘MMSI Check

DSC OPERATION 6

uRotate [CHANNEL] to set the specific 9-digit MMSI code.

•Push [16•C] or [DIAL•DUAL/GRP] to move the cursor forward or backward, respectively.

•Push [CLR] to cancel and return to the set up menu.

		--DSC Menu--	5
MMSI Check
			6
	_	________

<CLR˘Exit / ENT˘OK>

iAfter entering the 9-digit code, push [CHANNEL•ENTER] to set the code.

• Returns to the set up menu.

oPush [CLR] or rotate [CHANNEL] to select “Exit,” push [CHANNEL•ENTER].

•Returns to the DSC menu.

•Repeat again to return to the normal operation condition.

15