Icom IC-M505 instruction manual Push Channelenter to transmit the individual call

DSC OPERATION 6

eRotate [CHANNEL] to select the desired pre-programmed individual address or “Manual Input,” push [CHAN- NEL•ENTER].

•The ID code for the individual call can be set in advance. (p. 17)

•When “Manual Input” is selected, set the 9-digit MMSI number for the individual you wish to call by rotating [CHAN- NEL].

1st digit must not be ‘0’.

--DSC Menu--

Select Address

Manual Input John

˘Paul George Michael <CLR˘Exit / ENT˘OK>

rRotate [CHANNEL] to select a desired intership channel, push [CHANNEL•ENTER].

•Intership channels are already preset into the transceiver in rec- ommended order.

--DSC Menu--

Select Intership CH

˘08	6
69
77
06
<CLR˘Exit / ENT˘OK>
--DSC Menu--
Individual Call Ready

<CLR˘Exit / ENT˘OK>

tPush [CHANNEL•ENTER] to transmit the individual call.

•If Channel 70 is busy, the transceiver stands by until the channel becomes clear.

--DSC Menu--

Individual Call

Transmitting

27