Icom IC-M505 Programming Group ID, Rotate Channel to select AddGroup ID, push Channelenter

DProgramming Group ID

qPush [MENU] to enter the DSC menu.

wRotate [CHANNEL] to select “Set up,” push [CHAN- NEL•ENTER].

--DSC Menu-- Select Item

Position Report Polling Request Received Calls Distress Setting

˘Set up Exit

eRotate [CHANNEL] to select “Add:Group ID,” push [CHANNEL•ENTER].

--DSC Menu-- Set up

Add:INDV ID

˘Add:Group ID

DEL:INDV ID

DEL:Group ID

Offset Time

MMSI Check

DSC OPERATION	6
r Rotate [CHANNEL] to set the group ID and ID name.
• The group ID is a unique number that you create for your group.
The ID name is an associated text name for that group.
• Push [16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectively.
• Push [CLR] to cancel and return to the set up menu.
• “Full ID” appears when 100 DSC address IDs are already
set.
		6
• After entering an 8-digit ID code, push [CHANNEL•ENTER] or

[16•C] to enter a 10-character ID name.

• 1st digit ‘0’ is fixed for a group ID.

--DSC Menu-- Add:Group ID Input 8 digits

0________

Input name

_________

<CLR˘Exit / ENT˘OK>

tAfter inputting, push [CHANNEL•ENTER] to program. y Push [CLR] or rotate [CHANNEL] to select “Exit,” push

[CHANNEL•ENTER].

•Returns to the DSC menu.

•Repeat again to return to the normal operation condition.

19