Mounting the transceiver | Icom IC-M505 instruction

9 CONNECTIONS AND MAINTENANCE

■Mounting the transceiver

DUsing the supplied mounting bracket

The universal mounting bracket supplied with your transceiver allows overhead or dashboard mounting.

•Mount the transceiver securely with the 4 supplied screws (5 ⋅ 20) to a surface which is more than 10 mm thick and can support more than 5 kg.

•Mount the transceiver so that the face of the transceiver is at 90° to your line of sight when operating it.

CAUTION: KEEP the transceiver and microphone at least

1 meter away from your vessel’s magnetic navigation com- pass.

NOTE: Check the installation angle; the function display may not be easy-to-read at some angles.

•OVERHEAD MOUNTING

•MOUNTING ON THE BOARD

These screws are shown a mounting example only. Not supplied with acces- sories.

60

Image 66

Icom IC-M505 instruction manual Mounting the transceiver, Using the supplied mounting bracket

Contents

IM505 Equipment damage may occur Word DefinitionMay occur Personal injury, ﬁre or electric shock Case of Emergency DOC Iii Table of Contents Precautions OPERATOR’S License Operating RulesShip Station License Restricted Radiotelephone Operator Permit is the license Panel Description Front panel 2TRANSMIT Power KEY H/L 0TIME Zone Indicator Function display 1POSITION Indicator 2SCAN IndicatorMicrophone Channel Basic OperationChannel selection Call channel There are pre-programmed 57 international channels for International channelsAtis and DSC channels IC-M505 Push H/L to select the output power if necessary Receiving and transmitting Call channel programming Display backlight Channel commentsMicrophone Lock function NEL Optional voice scrambler operation Activating the scrambler Programming scrambler codesPush Channelenter Priority Scan Scan OperationScan types Normal Scan Setting TAG channels Clearing or setting all tagged channelsStarting a scan Operation DUALWATCH/TRI-WATCHDescription DUALWATCH/TRI-WATCH Simulation Rotate Channel to select Mmsi Check, push Channelenter DSC OperationMmsi code programming Rotate Channel to set the speciﬁc 9-digit Mmsi code Mmsi code check Check the 9-digit Mmsi DSC self ID code Rotate Channel to select AddINDV ID, push Channelenter DSC address IDProgramming Individual ID Rotate Channel to set the individual ID and ID name Deleting Individual ID Rotate Channel to select Delindv ID, push ChannelenterRotate Channel to select the desired ID name for deleting Programming Group ID Rotate Channel to select AddGroup ID, push ChannelenterRotate Channel to set the group ID and ID name Deleting Group ID Rotate Channel to select DELGroup ID, push Channelenter Position and time programming Position and time indication GPS information indication Distress call Simple callAfter 2 sec. Wait ACK Distress alert contains default Regular call Push Distress for 5 sec. to transmit the distress call Transmitting DSC calls Transmitting an individual call Push Channelenter to transmit the individual call Transmitting an individual acknowledgement Transmitting a group call Push Channelenter to transmit the group call Transmitting an all ships call Push Channelenter to transmit the all ships call Transmitting a position request call Push Channelenter to transmit the position request call Transmitting a position report call Push Channelenter to transmit the position report call Transmitting a polling request call Push Channelenter to transmit the polling request call Transmitting a position request reply call DSC Menu Position Reply Ready CLR˘Exit / ENT˘OK Transmitting a position report reply call Transmitting a polling request reply call Receiving a distress acknowledgement Receiving DSC callsReceiving a distress call Receiving a distress relay call Receiving an individual call Receiving a group callReceiving an all ships call Receiving a geographical area call Receiving a position request callReceiving a position report call Receiving a position report reply call Receiving a polling request callReceiving a position request reply call Receiving a polling request reply call Rotate Channel to select Distress, push CHAN- Nelenter Received messagesDistress message Rotate Channel to scroll the message Other messages Rotate Channel to select Other, push CHAN- Nelenter DSC Set mode No offset time defaultRotate Channel to select Offset Time, push Channelenter Automatic acknowledgement Rotate Channel to select Auto ACK, push ChannelenterPush Channelenter to set the condition Nmea Output Rotate Channel to select Nmea Output, push Channelenter Push IC to enter Intercom mode Other FunctionsIntercom operation RX Speaker function Deck or tower via an external speaker or hailer speaker Able Push Hailrx to enter hailer mode Hailer operation Stop Automatic foghorn functionUnderway Sail Selected foghorn Set mode items SET ModeSet mode programming Scan resume timer LCD contrast Dual/Tri-watchBeep tone Automatic foghorn frequency Radio power Scrambler typeScrambler code Connections and Maintenance Connections Antenna Fuse replacementSupplied accessories Microphone hanger Using the supplied mounting bracket Mounting the transceiver MB-75 installation Tighten the end bolts on the clamps rotate clockwise soThat the clamps press firmly against the inside UT-112/UT-98 installation HM-162E installation Return the cables and screws to the original position Completed installation should look like this Gasket Troubleshooting Problem Possible Cause Solution General Receiver Specifications and OptionsSpeciﬁcations Transmitter Dimensions OptionsFor mounting the transceiver to a panel Channel List International channels†Receive only Channel List 92.4 110 29.5 to 31.5 d Template165 146 R12 Max Cut here Unit mmPage Memo Intended Country of Use Kamiminami, Hirano-ku, Osaka 547-0003, Japan