23
6
SCAN OPERATION
ePush [↔] or rotate the tuning dial while pushing [FUNC] to
select the desired scan pause time.
•“2SEC”–“20SEC”:scan pauses for 2–20 sec.on a received sig-
nal.
•“HOLD”:scan pauses on a received signal until it dis-
appears.
rPush [(MODE)SET] to exit set mode.
◊Setting the scan resume time
The scan restarts after a signal disappears according to the
resume time.It can be set from 0–5 sec. or unlimited.
qPush [FUNC] + [(MODE)SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
wRotate [DIAL] until “Scan Resume”or “RESUmE”appears.
•“RESUmE”disappears after 1 sec.and the previously selected
scan resume time and “RE”appears when color LCD is OFF.
ePush [↔] or rotate the tuning dial while pushing [FUNC] to
select the desired scan resume time.
•“1SEC”–“5SEC”:scan restarts 1–5 sec. after the signal disap-
pears.
•“0SEC”:scan restarts immediately after the signal dis-
appears.
•“HOLD”:scan restarts by rotating [DIAL] only.
rPush [(MODE)SET] to exit set mode.
2 sec. resume timeScan resume time
set mode Scan resumes by
rotating [DIAL] only.
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : HOLD
10 sec. pause timeScan pause time set
mode Pause scan
Pause Scan : 10SEC
Priority : OFF
Beep Audio : VOLUME
Light : AUTO
A.Power OFF : OFF
Pause Scan : 10SEC
Priority : OFF
Beep Audio : VOLUME
Light : AUTO
A.Power OFF : OFF
Pause Scan : HOLD
Priority : OFF
Beep Audio : VOLUME
Light : AUTO
A.Power OFF : OFF