Icom IC-R3 - page 7

3

2

PANEL DESCRIPTION

tVFO/MEMORY SWITCH [V/M (SKIP)]

➥Push [V/M] to toggle between VFO and memory modes.

(p.7)

➥Push [V/M] for 1 sec.to enter memory write mode.

➥Push [V/M] for 2 sec.to wr ite the operating frequency

into the selected memory channel in VFO mode.Keep

pushing for 2 sec.or more to automatically select the

next memory channel, if desired.(p. 14)

➥Push [FUNC] + [(V/M)SKIP] to toggle the frequency skip

function ON or OFF in VFO mode.(p. 24)

➥Push [FUNC] + [(V/M)SKIP] to toggle the channel as

skip, program skip or non-skip channel in memory

mode.(p. 22)

➥Push [FUNC] + [(V/M)SKIP] for 2 sec. to program the

memory name while displaying the memory channel in

the color LCD.(p. 17)

yMODE SWITCH [MODE (SET)]

➥Push [MODE] to select the receive mode.(p. 12)

➥Push and hold [MODE] to enter tuning step setting con-

dition and rotate the tuning dial to select the tuning step.

(p.8)

➥Push [FUNC] + [(MODE)SET] to enter set mode. (p.38)

➥Push [FUNC] + [(MODE)SET] for 2 sec. to toggle the

lock function ON and OFF.(pgs.9, 24)

uMONITOR SWITCH [SQL (ATT)]

➥Push and hold to temporarily open the squelch and

monitor the operating frequency.(pgs. 12, 41)

➥While pushing [SQL], rotate the tuning dial to set the

squelch threshold level.(p. 11)

➥Push [FUNC] + [(SQL)ATT] to enter the attenuator set-

ting condition and rotate the tuning dial to set the atten-

uation level.(p. 9)

iEXTERNAL DC POWER JACK [DC 6V]

Allows charging of the BP-206 using the BC-136A/D wall

charger, or using an optional CP-18A/E cigarette lighter cable.

oAUDIO AND VIDEO OUTPUT JACK [A/V OUT]

Outputs a composite video and audio signals.(p. 5)

!0TUNING DIAL [DIAL]

➥Rotate [DIAL] to set operating frequencies, memory

channels, set mode contents, etc.(pgs. 7, 38)

➥While scanning, changes the scanning direction.(p. 19)

➥While pushing [SQL], sets the squelch level.(p. 11)

➥

While pushing [FUNC], sets the operating frequency in 100

kHz, 1 MHz or 10 MHz steps in VFO mode.(pgs. 8, 39)

➥While pushing [FUNC], sets the memory bank in mem-

ory mode.(p. 16)

➥While pushing [↔], selects programmed scan bank or

memory bank in VFO or memory mode, respectively.

Release [↔] to start the scan.(pgs. 19, 20)

!1EXTERNAL SPEAKER JACK [SP]

Connects an optional earphone or headphone.The inter-

nal speaker will not function when any external equipment

is connected.(See p. 55 for a list of available options.)

Contents

Main FOREWORD READ ALL INSTRUCTIONS SAVE THIS INSTRUCTION MANUAL This in- EXPLICIT DEFINITIONS CAUTIONS SUPPLIED ACCESSORIES OPERATING THEOR Y OPERATING NOTES TABLE OF CONTENTS iii ACCESSORY ATTACHMENT Antenna Battery installation Belt clip Handstrap (not supplied from Icom) 2 Page 2 Function display TSQL AM FM DUP W P ATTRX Page 2 Dual LCD 146.100.000 FREQUENCY AND CHANNEL SETTING VFO and memory channels M:A00 Operating band selection 145.000.000 3 Setting a frequency Setting a tuning step 146.100.000 FREQUENCY AND CHANNEL SETTING Selecting a memory channel Lock function Attenuator function 4 Receiving Setting volume level Setting squelch level 4 Monitor function Receive mode selection Display backlighting Setting the backlighting condition General Memory channel contents Programming during selection 5 Programming after selection Transferring memory contents to another memory Memory bank selection Memory clear 5 Memory names M:A00 146.100.000 15.0 JA3 TS 6 Scan types Full/band/programmed scan Memory (bank) scan Selecting scan edges Skip channel setting Scan resume condition Setting the scan pause time Setting the scan resume time Frequency skip function Programming a skip frequency Frequency skip function ON/OFF PRIORITY WA TCH Priority watch types 7 Priority watch operation Memory channel watch and memory scan watch VFO scan watch PRIORITY WATCH 8 Tone squelch operation Operation Setting subaudible tones for tone squelch operation Available subaudible tone frequencies (unit:Hz) Pocket beep operation Waiting for a call from a specic station qSet the operating frequency in FM mode. wSet the desired tone squelch tone in set mode. eTurn the priority watch OFF when used.(p. 26) rPush [FUNC] + [(MODE)SET] momentarily to enter set mode. 8 Tone scan DUPLEX OPERATION Duplex shift direction 9 Offset frequency BAND SCOPE 11 TV operation TV channel receiving Skip channel setting Automatic TV channel programming TV OPERATION TV frequency (AM TV) receiving TV frequency (AM TV) memory channel 11 ATV operation ATV memory channel Sub carrier adjustment DIRECTION FINDING Direction nding function example 13 Set mode Set mode items Dial select step Setting dial select step Beep tones Auto power-off function Power saver Monitor switch action Dial speed acceleration Lock function effect Display mode selection Display contrast Display brightness Display background color Cloning function Partial reset Total reset CAUTION: Battery cautions 14 BATTERY CHARGING Regular charging CP-18A/E fuse replacement Rapid charging with the BC-135 48 15 VFO mode Memory mode Program scan starting menu (p. 19) Bank scan starting menu (p. 20) OPERATION FLOW CHART 50 16 Australian channels New Zealand channels Taiwan channels 51 NOTE: 16 China channels Indonesian channels 53 FOT channels Italian channels NOTE: 17 General Receiver SPECIFICATIONS AND OPTIONS Operating periods Options 56 18 PROBLEM POSSIBLE CAUSE SOLUTION REF. QUICK REFERENCE iR3 57 q Cut w Fold e Complete DUPLEX OPERATION 19 SCAN CPU RESETTING LOCK FUNCTION SET MODE DECLARATION OF CONFORMITY We Icom Inc. Japan Icom (Europe) GmbH T. Aoki General Manager Icom (Europe) GmbH