36
11 TV OPERATION
■ATV operation
The IC-R3 ATV-type can receive an amateur TV (FM TV)
within 900–1300 and 2250–2450.095 MHz.The received
video and audio can be output from [A/V OUT] if desired.(p.
5)
qPush [FUNC] + [↕] for 2 sec.to turn the color LCD ON, if
desired.
•Only the audio part of the TVcontents can be received.
wPush [↔] one or more times to select the 1200 or 2400
MHz bands.
ePush [FUNC] + [↕] one or more times to select the ama-
teur TV screen.
•“FtV”and frequency appear in the sub LCD.
•The squelch is automatically opened.Push [SQL] to toggle be-
tween squelch open and audio mute conditions.
rRotate [DIAL] to set the desired frequency.
The video display mode can be selected as positive and
negative depending on the received signal.Push [MODE]
to toggle the display mode, if desired.
◊ATV memory channel
The receiver has 50 memory channels for storage of often-
used ATV (Amateur TV) frequencies.
qSet the desired frequency with [DIAL].
•Push [↔] to select the 1200 or 2400 MHz band.
•Rotate [DIAL] while pushing [FUNC] for dial select step.(p. 39)
wPush [V/M] for 1 sec.to indicate memory channels.
•Do not hold [V/M] for more than 2 sec., otherwise the previously
selected memory channel will be overwritten.
eRotate [DIAL] to select the desired channel.
rPush [V/M] for 1 sec.to program.
•Keep pushing for 2 sec.or more to
automatically select the next mem-
ory channel, if desired.
Memory programming after selection, memory transferring
or memory clearing can be used as same manner of regu-
lar memory channels.(pgs. 15, 16)
◊Sub carrier adjustment
qPush [FUNC] + [↔] for 2 sec. to enter sub carrier set
mode.
wPush [↔] or rotate the tuning dial
while pushing [FUNC] to adjust
sub carrier for better audio re-
ceiving.
ePush [↔] to exit sub carrier set mode.
FM
W
RX
FM
W
RX
RX