45
13
OTHER FUNCTIONS
■Cloning function
The IC-R3 has receiver-to-receiver data cloning capability.
This function is useful when you want to copy all of the pro-
grammed contents from one IC-R3 to another.An optional
OPC-474 CLONING CABLE is required.
The optional CS-R3 CLONING SOFTWARE and the optional
OPC-478 CLONING CABLE are available to clone and edit
contents with a PC (for Microsoft®Windows®95 and 98).
qWhile pushing [MODE] and ó[UP], push [POWER] for 2
sec.to enter cloning mode.
•“CLonE”appears.
wConnect an optional OPC-474 between both [SP] jacks.
ePush [SQL] on the “mas-
ter”receiver (receiver-to-
receiver cloning only).
•“oUt”appears and the signal
indicator shows that cloning
is taking place.
rPush [POWER] for 2 sec.
to turn power OFF.
Microsoft®and Windows®are regis-
tered trademarks of Microsoft Corpo-
ration in the U.S.A and other
countries.
■Partial reset
If you want to initialize the operating conditions (VFO fre-
quency, VFO settings, set mode contents) without clearing the
memory contents, a partial resetting function is available for
the receiver.
➥While pushing [FUNC] and [V/M], turn power ON to par-
tially reset the receiver.
■Total reset
Reset the CPU before operating the receiver for the first time,
or when the internal CPU malfunctions.
➥While pushing [FUNC], [V/M] and [MODE], turn power ON
to reset the CPU.
•“CLEAR”appears in the sub LCD when resetting the CPU.
CAUTION: Resetting the CPU returns all programmed
contents to their default settings.
OPC-474