32
9DUPLEX OPERATION
◊Offset frequency
During duplex operation, the transmit station frequency is
shifted from the receive station frequency by an amount de-
termined by the offset frequency.
qSelect VFO mode or desired memory channel to be pro-
grammed.
wPush [FUNC] + [(MODE)SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
eRotate [DIAL] until “Offset Freq.”or “oFFSEt”appears.
•“oFFSEt”disappears after 1 sec.and “oW”appears when the
color LCD is OFF.
rPush [↔] or rotate the tuning dial while pushing [FUNC] to
set the desired offset.
•The offset frequency changes according to the selected tuning
step.(p. 8)
tPush [(MODE)SET] to exit set mode.
Offset frequency set
mode
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 7.600
Scan Resume : 2SEC
0.6 MHz (600 kHz)
offset 7.6 MHz offset