33
10
BAND SCOPE
The band scope function allows you to visually check a spec-
ified frequency range.Sweep range can be selected from ±5
kHz through ±500 kHz.
Receive audio is muted while monitoring the band scope.
Push [SQL] to cancel sweeping and receive the audio.
qPush [FUNC] + [↕] for 2 sec.to turn the color LCD ON.
wPush [FUNC] + [↕] one or more times to select the band
scope screen.
eSet the desired frequency as band scope center frequency.
rPush [FUNC] + [V/M] momentarily to select the sweep
range, if desired.
•5, 10, 20, 100 and 500 kHz sweep ranges are available.
tPush [FUNC] + [V/M] momentarily to start a sweep once
or push them for 2 sec.to start sweeping continuously.
•Signal conditions (strengths) appear starting from the center of
the range.
•Push [SQL] to cancel sweeping.
yRotate [DIAL] to set the highlighted cursor to the desired
waveform and set the frequency of the signal.
•Start sweeping to set the selected frequency to the center fre-
quency.
FM
146.100.000 TS= 25.0
SWEEP-500kS1 3 5 7 9 VOL
Sweep range