58
19 QUICK REFERENCE
■SCAN
◊Full/band/programmed scan
qSelect VFO mode with [V/M].
wMake sure the squelch is set to
the threshold point.
ePush [↔] for 2 sec.to start the
scan.
•Rotate [DIAL] while pushing [↔] to
select scan edge, if desired.
•To change the scanning direction, ro-
tate [DIAL].
rPush [↔] again to stop the scan.
◊Memory (bank) scan
qSelect memory mode with [V/M].
wMake sure the squelch is set to
the threshold point.
ePush [↔] for 2 sec.to star t the
scan.
•Rotate [DIAL] while pushing [↔] to
turn memory bank scan ON or OFF,
if desired.
rPush [↔] again to stop the scan.
■SET MODE
qPush [FUNC] + [(MODE)SET]
momentarily to enter set mode.
•Select non-band scope screen in ad-
vance for color LCD.
wRotate [DIAL] to select a display.
ePush [↔] or rotate [DIAL] while
pushing [FUNC] to set the condi-
tion.
rPush [(MODE)SET] to exit set
mode.
■LOCK FUNCTION
Push [FUNC] + [(MODE)SET] for 2
sec.to toggle the lock function ON or
OFF.(p.9)
■CPU RESETTING
◊Partial resetting(p. 45)
While pushing [FUNC] and [V/M],
turn power on to partially reset the
receiver.
•Partial resetting does not clear the mem-
ory channel contents.
◊Total resetting(p. 45)
While pushing [FUNC], [V/M] and
[MODE], turn power on to reset the
receiver.
Caution:Resetting the receiver
initializes all memory contents.