ICON Enterprises SB-100 manual PAY Type Quick Pick, Supervisor Code # Quick Pick

PAY TYPE (Quick Pick 50)

The SB-100 automatically starts your payroll

using monthly, semi-monthly (starting on the 1st and 16th of each month), bi-weekly, or weekly formats. After selecting the proper pay type, press ENTER to set the current pay start date. Once this is set, the Time Clock will automatically start each pay period.

SUPERVISOR CODE # (Quick Pick 51)

The Time Clock uses a six-digit code to access Supervisor Mode. To enter a new code number, and replace the existing one, press ENTER to start the display blinking, then type in your new code number. You may change your code as often as you wish. The default code

is 00 00 00.

PRINTER TYPE (Quick Pick 52)

The SB-100 will directly communicate with all EPSON FX

/IBM Proprinter compatible dot matrix printers. It will also support laser printers compatible with the Hewlett Packard Laser Jet II. Both printer types must use a parallel interface. Select LASER for laser printing, or DOTMX for dot matrix. Or you can choose to print through your PC by installing the enclosed PC Reporter software.

PERSONNEL REPORT (Quick Pick 53)

This report prints each employee's ID, name and

hourly wage.

SET DATE & TIME (Quick Pick 54)

The SB-100 will automatically adjust your date and time for the month, leap year, and day light savings time. You should seldom need to change the time or date. Should you change the time while employees are punched-in on the Time Clock, it will automatically punch them out at the old time and back in at the new time. This will avoid the need for any corrections in the Time Clock's reports.

To change the system time:

Use to scroll the Month, Day, Year, Day of Week, Hour, and Minute. Pressing ENTER advances you from one field to another. Pressing CLEAR returns the cursor to its prior location.

SHOW OPTIONS (Quick Pick 55)

This feature shows the version of SB-100 Employee Time

Clock software being used on this machine.

6