Installation Assembling the Roof Flue KIT

INSTALLATION

35 ASSEMBLING THE ROOF FLUE KIT

Determine the correct height that the flue should terminate above the roof. If after calculating or measuring the overall flue height from the top of the boiler, it is necessary to cut both pipes of assembly A, then ensure they are cut equally leaving the inner flue tube longer than the outer air tube as supplied. (Refer to No. 7 below)

Ensure the cut pipe ends are free from any burrs.

1.Ensure the flue seal collar B is located onto the flue assembly A.

MAX LENGTH (for all models)

MIN LENGTH (for all models)

min16	o
	max 41

2. Position the roof flashing plate D (supplied separately) over the hole cut in the roof and insert flue assembly A from the roof end.

3.Remove the casing top blanking plate and gasket and refit to the boiler rear flue hole.

4.Fit the boiler vertical conversion kit (to be found in the vertical connector kit). Refer to Frame 26 No's 2 to 7.

5.	Push fit the vertical connector E (supplied separately)	E
	into the boiler flue connection and retain with the four	E	5
	securing screws provided.		5
	securing screws provided.
6.	"Push" fit extension duct F (if required (supplied	3
	separately)) and the roof flue kit assembly A into the
	vertical connector E.
	Ø 100

7. If the last extension duct requires cutting, measure the distance (outer ducts) between the duct and the terminal and add 100 mm to this dimension. This gives the length of the last extension duct.

	Note. Check the position of the inner flue duct
	relative to the outer duct on the assembled
	extension duct(s) and ensure the terminal flue duct	cla7731
	is cut longer than the air duct to ensure	cla7731
	is cut longer than the air duct to ensure
	engagement in the final flue duct seal.

8.Slide down and position the flue seal collar B over the roof plate D and secure it with the 3 screws C to the flue assembly A.

9.Finally ensure the roof flashing plate D is correctly sealed to the roof.

cla7927

Ø60

7469

7470

OUTLET

F 6

cla7732

mxhe7688

A	A
C	C
	B
	B
7
	D
	cla7770

FLUE

classic HE - Installation & Servicing

HE12, HE15, HE18, HE9 specifications

The IDEAL INDUSTRIES HE series, comprising the HE24, HE18, HE15, and HE12 models, represents a significant advancement in the field of electrical testing and measurement tools. These versatile testers stand out in professional environments for their high accuracy, user-friendly interfaces, and advanced features designed to enhance efficiency and reliability in electrical inspections.

The HE24 is the flagship model, boasting an extensive range of functionalities. It includes advanced digital multimeter capabilities, allowing for precise measurements of voltage, current, and resistance. Its True RMS feature ensures accurate readings, even with non-linear loads. The HE24 also incorporates advanced connectivity options, including Bluetooth technology, enabling users to transfer data wirelessly to smartphones or tablets for further analysis. The large, backlit display enhances visibility in various lighting conditions, making it an ideal tool for both indoor and outdoor use.

The HE18 model, while slightly more streamlined than the HE24, still offers robust capabilities. It features multiple testing modes, including continuity and diode testing, catering to a wide range of electrical tasks. The HE18 also utilizes a user-friendly interface, allowing technicians to navigate easily through various functions. Equipped with a protective rubber housing, this model is durable and built to withstand the rigors of frequent use on job sites.

The HE15 and HE12 models represent the compact, entry-level offerings in the HE series. Designed for the budget-conscious user, these models retain essential functionalities such as basic voltage and current measuring capabilities while prioritizing ease of use. The HE15 includes a simple LED indicator to signal when measurements are being taken, promoting straightforward operation. Additionally, the HE12 features a lightweight design, making it the perfect tool for on-the-go technicians.

All models in the IDEAL INDUSTRIES HE series are engineered with safety in mind, adhering to stringent international testing standards. They provide superior insulation resistance and a high degree of accuracy, mitigating the risks associated with electrical work. Furthermore, their IP-rated enclosures ensure protection against dust and moisture, enhancing longevity.

In conclusion, the IDEAL INDUSTRIES HE24, HE18, HE15, and HE12 series represent a comprehensive range of electrical testing tools that cater to professionals' varied needs. With their combination of advanced features, user-friendly designs, and safety compliance, these models are excellent choices for any electrical technician aiming for accuracy and efficiency in their work.

IDEAL INDUSTRIES HE18, HE9, HE12, HE15 manual Installation Assembling the Roof Flue KIT

Models: HE12 HE15 HE18 HE9