iHome instruction manual Troubleshooting Unit doesn’t respond no power, Resetting the iBT52

Troubleshooting

Unit doesn’t respond (no power)

•Make sure unit is completely charged.

•Check that all connections are correct and properly plugged in.

•Make sure your device is properly paired with the iBT52.

•Make sure the Power On/Off Switch switch is not in the OFF (left) position.

Resetting the iBT52

If the unit becomes “locked up” or unresponsive, you may need to reset it. To do so, press and hold the iH Button for 6 seconds, the iH Button/Indicator Light flashes blue and red. Then press and hold the iH Button for 10 seconds. 2 long beeps indicate unit has been reset.

Trouble pairing device/computer with iBT52

Bluetooth implementation varies depending on your device’s hardware and operating system. Please see our website for updates on pairing.

•When you power ON the Receiver, it will automatically link with the last previously paired Bluetooth device if the device is still within range (about 30 feet). To pair with a different device you must turn off Bluetooth capability on the already paired device, or take it out of range.

•If your device does not auto-link when within range, re-pair the device. To do so, first delete the iBT52 from your Bluetooth devices menu. Move the Power On/Off Switch on the unit to the OFF position then back to ON to begin pairing (see Pairing Your Device for pairing details).

•Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing and linking.

For further information and to see the latest instructions,

visit www.ihomeaudio.com/support