5. Attach the nozzle on the air pump to the valve on

the floor of the Inflatable Liner (29). Use the air pump to fill the bottom of the Inflatable Liner with air.

Be extremely careful not to puncture the Liner. You will need to operate the pump by hand for this step.

Next, attach the nozzle on the air pump to the valve

on the bolster of the Inflatable Liner (29). Fill the bol- ster until there are no wrinkles.

6.Before filling the spa with water, make sure that the spa is in the desired location, that it can easily be serviced, and that the cover can easily be removed.

Once the spa is filled, it will have to be drained before it can be moved.

Using a garden hose or other clean water source, fill the spa until there are 2 to 3 inches of water in the spa. Next, smooth out the wrinkles in the sides

and bottom of the Inflatable Liner (29). Although a few wrinkles are normal, it is very important to smooth out as many wrinkles as possible.

Resume filling the spa until the water reaches the fill

line. Do not overfill the spa.

Note: When the spa is

filled, the Spa

Surround (9) may bow

slightly; this is a

normal condition.

 

 

After the spa is filled, the spa jet unit must be primed before the spa is used (see PRIMING THE

SPA JET UNIT on page 10). Important: Prime the spa jet unit before continuing to step 7.

7.Use the air pump to fill both chambers of the Inflatable Cover (4) with air.

Slide one of the four straps inside the Spa Cover

(11)through one of the loops on the Inflatable Cover

(4).Attach the latch on the strap to the buckle on the other end of the strap. Attach the other three straps

to the loops on the Inflatable Cover in the same way.

8.Place the Spa Cover (11) over the spa and line up the bulge on the Spa Cover with the console on the

dry side jet pack. Snap each of the six latches on the Spa Cover into the buckles on the Spa Surround (9).

9

5

29

 

Air Valve

 

 

 

 

 

Air Valve

6

 

29

Fill Line

 

 

 

 

 

 

9

 

 

7

 

 

Air Valve

 

 

 

 

4

 

 

 

 

 

Pouch for

 

11

 

Jet Plugs

 

 

 

 

 

 

Latches

 

 

 

and Buckles

8

 

 

Bulge

 

 

 

Console

 

 

 

11

 

 

 

Latch

9

 

 

Buckle

 

 

 

Page 9
Image 9
Image 831.10815 user manual Line. Do not overfill the spa