Image IMTL49105.0 user manual Frame Bolts, Top View

8.Lower the Uprights (31, 36) until the Handrails (18) are touching the floor.

See the lower drawing. Position the Uprights (31, 36) so the treadmill Frame (74) is centered between them.

Firmly tighten the four Upright Bolts (40) and the two Frame Bolts (32). Be careful not to overtighten the

Frame Bolts.

9.Attach the end of the ground wire on the Wire Harness (28) to the indicated small hole in the Upright Base (48) with a Silver Ground Screw (27).

Make sure that the grommet is pressed into the side of the Right Upright (36).

Raise the Uprights (36, 31) to the vertical position.

8	31, 36	32
		40
	18
	Top View
36	74	31
9
	Grommet
	36
	28
	48
	Ground
	Wire
	27

9