The IE-iMcV-T1-Mux/4 + Ethernet offers the following features:

Four T1 ports with RJ-48 connectors

One full bandwidth Ethernet 10/100BaseT port (specific model)

1+1 protection switching via two SFP-based optical ports (specific model)

DDMI supported on SFP ports

One end-to-end serial RS-232 port on an RJ-45 connector, supporting up to 120K baud rate

Local CLI management console port on a Mini Jack connector

Remote management capability through iMediaChassis series with SNMP Management

AIS generation on signal loss on all T1 interfaces

SNMP Alarm TRAP reporting in managed chassis

AutoCross for the Ethernet port

Last Gasp on remote power loss

Supports all MSA-compliant SFPs, 155mpbs

Link Fault Pass-Through (LFPT)

Bandwidth control, 10/100 Frc/Adv, Flow Control, FXLL

The IE-iMcV-T1-Mux/4 + Ethernet module is a dual-wide iMcV module.

Compatible chassis include the following:

iMediaChassis series

MediaChassis series (2 slot models )

IE-MediaChassis series (2 slot models)

2

Page 6
Image 6
IMC Networks IE-IMCV-T1-MUX/4 operation manual IE-iMcV-T1-Mux/4 + Ethernet offers the following features