Independentrating systemfor movies
XX-rated (For adults only)
Not intended for anyone 17 and
NC-17 under
Restricted (Under 17requires
Raccompanying parent or adult)
Parents Strongly Cautioned (Some
PG-13 material may be inappropriate for
children under 13)
Parental Guidance Suggested
PG (Some material may not be suitable
for children)
General Audience (Appropriate for all
Gages)
Note:
•Ifyou place an"X" in thebox next to "None"
Rated, programs rated "None" will be blocked;
however, programs that do not provide any
rating information willnot be blocked.
• To display the rating of the program you are
watching, press I_ on the remote control. If
itis rated "None," the word "NONE" appears in
the RECALL screen (as shown below right). If
rating information is notprovided, no rating will
appear in the RECALL screen.
Locking channels
With the Lock feature, you can lock specific
channels. The locked channels can only be accessed
by entering the PIN.
To lock channels:
1Fromthe Setup menu, highlight Installationand
press @.
2Press • or• to selectChannel 0ptiogs and press
@. The list of channels will appear.
3Press I_ and then • or • to select achannel in
the lock column.
4Press @. PIN code entry will be required toset a
locked channel.
Note: If the PIN code hasnot been set yet, a
warning message will appear.
5A _/symbol will appear inthe box.
Toremove the v" symbol, press @ again.
Unlocking programs temporarily
Ifyou try to tune the TV to a pro_am that exceeds
therating limits you set, the TV will enter program
lock mode and the following message will appear on-
screen:
You can either temporarily unlock the program or
select an unlocked program to watch.
To temporarily unlock the program:
1Press _.
2Enter your four-digit PIN code and press @. If
the correct code is entered, theprogram lock
mode is temporarily released and the normal
picture appears. The program lock mode will
resume when you rune to another TVprogram, or
when the TV isturned off and turned on again.
Usingthe input lock feature
You can use the Input Lock feature to lock the video
inputs (Video, ColorStreamHD,HDMI 1, HDMI2, and
PC)and channels 3 and 4. Youwill not be able to
view the input sources or channels until you unlock
theinputs.
To lock/unlock the video inputs:
1Fromthe Locks menu, Press • to display the PIN
code entering screen.
2 Enter your four-digit PIN code and press @.
Press • to highlight Input Lock and press I_ to
select the level of video input locking you prefer,
as described below.
42