Setup/Installation menu layout
The Installationmenu contains the Terrestrial and SystemStatus menus.
To open the Installati0n menu (illustrated below), press M_u onthe remote control or TV control panel, open the
Setup menu, select Installation, and press @.
! NN ....Terrestrial Input Confi_lration _ [Opens the Input Configuration menu]
Channel Pro_am _ [Start Scan] _ [Scans for new channels on ANT/CABLE
Channel Options _ [Opens the Skip /Lock Channel menu]
Channel Tuning Mode _ Standard /Auto /Digital
Eastern /Newfoundland /Atlantic /Hawaii /Alaska /
Time Zone Pacific /Mountain /Central
Signal Meter _ [Opens the Signal Meter menu]
SystemStatus
System Information _ [Opens theSystem Information screen]
Navigating the menusystem
You can use thebuttons on the remote control or TV
control panel to access and navigate your TV's
onscreen menu system.
•Press M_u to open the menu system.
•When a menu is open, use theup/down/left/right
arrow buttons (AIF_) on the remote control or
TV control panel to move in the corresponding
direction in the menu.
•Press @ to save your menu settings or select a
highlighted item. (A highlighted menu item appears
in a different color in the menu.)
•All menus close automatically if you do not make a
selection within 60 seconds, except the signal meter
menu, which closes automatically after about 5
minutes.
•To close amenu instantly, press EXic)T.
Note:
The menu background may sometimes appear
black, depending on the signal the TVis
receiving. This is not asign of malfunction.
23