•If you are not receiving asecond audio program

from a known SAP source, make sure the MTS

feature is set toSAP mode (_ page 38).

•If you hear audio that seems "incorrect" for the

pro_am you are watching (such asmusic or a

foreign language), the SAPmode may be on.Set the

MTSfeature to Stereomode (_ page 38).

Remotecontrolproblems
•Remove all obstructions beta_-een the remote control
and the TV.
•The remote control batteries may be dead. Replace
the batteries (_ page 20).
•If the TV still does not act as expected, use the
Reset Factory Defaults procedure (_" page 28).
Channeltuningproblems
•The channel may have been erased from the channel
memory by the Programming channels
automatically feature. Add the channel to the
channel memory (_ page 32).
•The channel may be blocked by the LOCI( feature.
Unblock the channel (_' page 42).
•If you are unable to rune digital channels, check the
antenna configuration (_. page 24). If you are still
unable to rune digital channels, clear all channels
from the channel list and reprogram channels into
the channel memory (r#_ page 24). If you are still
unable to rune digital channels, use the Reset
Factory Defaults procedure (_ page 28). Also see
"TV stops responding to controls" and "Other
problems" (_' page 53).
Closedcaptionproblems
•If the program or video you selected is not closed-
captioned, no captions will display (L_.g_page 37).
•If text is not available, ablack rectangle may appear.
If this happens, mrn off the closed caption feature
(r._ page 37).
•A closed-caption signal may not display correctly in
the following situations: a) when a videotape has
been dubbed; b) when the signal reception is weak;
or c) when the signal reception is nonstandard (_:g.
page 37).
Ratingblocking(V-Chip)problems
•If you forget your PIN code: While the PIN code
entering screen is displayed, press _ four times
within 5 seconds. The PIN code you previously
stored will be cleared (L_-¢:page 40).
NoREGZA-LINKoperation
•The REGZA-LINK feature is available for Toshiba
REGZA-LINK compatible devices.
•Make sure the HDMI cables with the HDMI Logo
(|=._rT_ll _) are used.
•When the connected REGZA-LINK device does not
work correctly after you have changed settings of
the device, turn off your TV and unplug the power
cord, then plug and rum on again.
•If several devices are connected, REGZA-LINK
feature may not operate properly.
•Read the instruction manual furnished with the
connected REGZA-LINK device.
HDMIproblems
For HDMI cables
Make sure to use cables with the HDMI Logo
(IH_==_Ir_R| _) (_. page 13).
MediaPlayer problems
•Make sure that devices are connected correctly.
•Incorrect behavior may occur with aUSB HUB
connection.
•Photo files that have been processed by PC photo
editing software may not be correctly viewed.
•The TV may select one format automatically and
play it when contents that support two ormore
formats are played.
•Confirm contents of the USB storage device are
formats that correspond with this TV (_g' page 44).
54