Toshiba 32SL410U Selecting the picture size, Switching between two channels using Channel Return

Press the Channel Number (0-9) on the remote

control, followed by the dash (_]) button and then the sub-channel number. For example, to select

digital channel 125-1, press 1, 2, 5, -, 1, then @.

Note: If a digital channel is not programmed - either through the automatic channel scan (_, page 24) or the Channel add function (_ page 26) -youwill have to tune the RF channel using

the Channel Number and dash (_) on the remote control.

Switching between two channels using Channel Return

The Channel Return feature allows you to switch between two channels without entering an actual channel number each time.

1 Select the first channel you want to view.

2 Select a second channel using the Channel

Number buttons (and the dash (_) button if selecting a digital channel).

Press CHURNon the remote control. The previous

channel will display. Each time you press CHURN, the TV will switch back and forth beta_-een the last

ta_-o channels that were tuned.

Note: If you press CH_SNfrom a non-antenna input, the TV will return to the last-viewed input.

Switching between two channels using SurfLock TM

The SurfLock TM feature temporarily "memorizes"

one channel to the eH(_TNbutton, so you can return to that channel quickly from any other channel by

pressing CH_TN To memorize a channel to the eH(_'m button:

1Tune the TV to the channel you want to pro_am into the eHc_TNbutton.

2Press and hold CH(_TNfor about 2 seconds until the message "Memorized" appears on-screen. The

CH RTN

channel has been programmed to the O button.

3You can then change channels repeatedly, and

CH RTN

when you press © , the memorized channel will be tuned.

The TV will return to the memorized channel one

time only. Once you press CH(_TNand then change channels again, the CH RTN memory will be cleared

and the button will function as Channel Return, by

switching back and forth beta_-een the last ta_-o

channels that are tuned. This feature also works for

external inputs.

Selecting the picture size

You can view many pro_am formats in a variety of picture sizes - Normal, TheaterWide 1, TheaterWide

2, TheaterWide 3, Full 4:3, Native, and Dot by Dot

(available in PC Mode Only).

Note: The "picture size" illustrations are examples only. The format of the image (in any of the picture sizes) will vary depending on the format of the signal you are currently watching. Select the picture size that displays the current program the way that looks best to you.

You can save separate picture size preferences for each input on your TV.

To select the picture size using the remote

control:

1Press P!C_E on the remote control.

2While the Picture Size screen is open, you can do

one of the following to select the desired picture size:

Pie	,_IZE
• Repeatedly press _	.

•Press the corresponding Number button (0-6) while the Picture Size screen is open.

•Press • or • while the Picture Size screen is open.

To select the picture size using the menus:

1 Select Picture Size in the Theater Settings menu.

2 Press _ or _" to select the desired picture size

setting.

3Highlight Done and press @.

Note: Some of the picture sizes may not be available depending on the receiving signal format (those will be "grayed out" in the Picture Size screen).

Using these functions to change the picture

size (i.e., changing the height/width ratio) for any purpose other than your private viewing

may be prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Note: If you select one of the TheaterWide® picture sizes, the top and bottom edges of the picture (including subtitles or captions) may be hidden. To view the hidden edges, either scroll the picture (TheaterWide 2 and 3 only) or try

33