MULTI-PURPOSE BENCH ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended this machine be assembled by two or more people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Attach the Main Frame (#1) to the Front & Rear Stabilizers (#2 & 3). Secure each end with two M10 x ¾” Allen Bolts (#30) and ∅ ¾” Washers (#36). Attach a Lock Knob (#18) to the Nut underneath the Main Frame (#1).
B.) Slide the Sliding Block (#8) onto the Incline Adjustment Bar (#9). Align the hole then secure it with a Lock Knob (#18) to hold the Sliding Block in position.
C.) Attach the Incline Adjustment Bar (#9) to the brackets on the Main Frame (#1). Secure each end with one M10 x 2 ½” Carriage Bolt (#29), ∅ ¾” Washer (#36), and M10 Aircraft Nut (#38).
D.) Cover the Stabilizer ends with four 2” Stabilizer End Caps (#28).
DIAGRAM 1
21
