Indesit FM 37K IX DK manual How to Keep Your Oven in Shape, and buttons, Timer Feature

time within 4 seconds:

When "auto" is lighted, it indicates that the length and end cooking time have been preset to operate in automatic mode. At this point, the oven will turn on automatically at 12:30 in order to finish the cooking session within 30

minutes. When the oven is on, the symbol (cooking pot) will appear on the display for the entire length of the

cooking process. The button can be pressed at any time to display the setting for the length of the cooking

time, while the button can be pressed to display the end cooking time.

At the end of the cooking time, an acoustic signal will sound. Press any button it turn it off (except the

and buttons).

Immediate Start Time with Preset Cooking Length When only the length of the cooking time is set (points 1 and 2 of the paragraph entitled, "Delayed Start Time with Preset Cooking Length"), the cooking session starts immediately.

Cancelling a Preset Cooking Time

Press thebutton, and use the button to set the time to:

Then press the manual cooking mode button .

Timer Feature

The timer can be used to count down from a given length of time.This feature does not control when the oven comes on or turns off, but, rather, it only emits an acoustic signal when the preset time has run out.

Press the button, and the display will read:

Then use the and buttons to set the desired time. Release the button, and the timer will start at that second. The display will show the current time.

At the end of the preset time, an acoustic signal will sound, which can be turned off by pressing any button (except the

and buttons), and the symbol will turn off.

Changing and Cancelling Settings

•The settings can be changed at any time by pressing the corresponding button and using the or button.

•When the length setting for the cooking time is cancelled, the end cooking time setting is also cancelled, and vice versa.

•When in automatic cooking mode, the appliance will not accept end cooking times prior to the start cooking time proposed by the appliance itself.

How to Keep Your Oven in Shape

Before cleaning your oven, or performing maintenance, disconnect it from the power supply. To extend the life of your oven, it must be cleaned frequently, keeping in mind that:

•The self-cleaning panels (if present) and the enameled parts should be washed with warm water - abrasive powders and corrosive substances should be avoided;

•The inside of the oven should be cleaned immediately after use with warm water and soap; the soap should be rinsed away and the interior dried thoroughly;

•Stainless steel can be stained if it remains in contact with agressive detergents (containing phosphorus) or water with a high lime content. We recommend that you rinse these parts thoroughly and dry them well after cleaning. It is also a good idea to dry any water spills;

•Never line the bottom of the oven with aluminium foil because the buildup of heat will not only impede the cooking process, but could also damage the enamel.

Replacing the Lamp in the Oven

•Cutoff the supply of power to the oven by turning off the omni-polar switch connecting it to the mains, or by removing the plug if it is accessible;

•Unscrew the glass cover attached to the lamp holder;

•Unscrew the lamp and replace it with another high-

temperature lamp (300° C) with the following characteristics:

-Voltage: 230/240 V

-Wattage: 25W

-Socket: E14

•Remount the glass cover and reconnect the appliance to the power supply.

6