41
Electronic shutter setting
2. The mode and speed change sequence is indicated below.
1/60 1/250 1/500 1/1000 1/2000
CC FRM Var.1/

Lock scan mode setting

The lock scan mode avoids flicker in scenes showing a computer
monitor screen.
1. Set the Shutter switch to SEL to produce the lock scan mode
(viewfinder screen indicated in figure).
2. While Var.1/*** is indicated (about 6 seconds) set the shutter spee d
with the buttons.
1/50.32 1/2092 (V-21W)
1/50.30 1/2053 (V-21 )
3. The image of a computer screen having a different scanning frequenc y includes a light or dark bar rolling up
or down through the image. Adjust the buttons to minimize the bar.
button
Flicker-free image
Fast shutter speed
Roll.
Dark
Light
Slow shutter speed
button
Roll
(Note) Flicker cannot be corrected when the display screen scanning frequenc y is below 50.30 Hz.

CC frame mode

Increases vertical resolution, but sensitivity is
reduced 1 F stop.

Operation with RU-Z1, RC-Z1/RC-Z11

1. Press the Shutter button to select the shutter
mode in the following sequence.
OFF 1/60 1/250 1/500 1/1000 1/2000
CC FRM AES Var.1/
2. In the lock scan mode, the shutter speed can
be set with the up/down buttons in the same
manner as the camera.
Lock scan
mode
Shutter speed buttons during lock
scan mode.