60
Function menu screen
1.1 DTL (Scene 1 to 4) sub-menu (corresponds to scene file)
DTL LEVEL OFF 128 0127 Sets detail amount.
DTL FREQ SOFT STANDARD
SHARP
SOFT: Set to low detail frequency
STANDARD: Set to standard detail frequency
SHARP: Set to high detail frequency
FLESHTONE OFF ON Set to on to moderate flesh tone detail amount. Color setting is
at the DTL sub-menu. (Operates only during remote control.)
LEVEL 128 0127 Adjusts flesh tone detail amount for a soft image.
AUTO SETUP Press the button for 1 second to detect the color phase at the
center of the image and set to the optimum position.
PHASE 128 0+97 127 Adjusts color phase to flesh tone. The flesh tone detection
range is indicated. (The indication signal is overlapped on the
video output. Use care not to operate this function while ON
AIR.)
WIDTH 128 0127
2. Function 2 main menu
M.BLACK 128 0 127 Sets the master black value.
DYNA CHROMA OFF ON
DNR MODE MODE1 MODE2
ZEBRA
TYPE 12
LEVEL LOW MID HIGH
CS-1 SW CONTRAST
QUICK FOCUS
FULL AUTO
CS-2 SW CONTRAST
QUICK FOCUS
FULL AUTO
MIC SENSE LOW MID HIGH Set according to microphone sensitivity. Normally set to MID.
PHANTOM OFF ON
F.AUTO SEL
2-1 Full Auto SEL sub-menu
AES OFF ON
FAW OFF ON