PLANNING YOUR SYSTEM

Before deciding where to best place your speakers, survey your room and study Figures 1 and 2.

Left

Center

Right

 

Channel

Subwoofer

Front

Front

(above or below TV)

Channel

Channel

 

 

 

Left

Couch

Right

Surround

Surround

Channel

Channel

Figure 1. In this overhead view of a typical 5-channel installation, satellite speakers are used to reproduce sound for the front and surround channels. The center channel reproduces sound and dialogue. The powered subwoofer provides bass for effects and music.

Left

Center

Right

 

Channel

 

Front

Front

Subwoofer

(above or below TV)

Channel

Channel

 

 

 

 

 

Couch

 

 

Left

Left

Center

Right

Right

Surround

Surround

Rear

Rear

Rear

Channel

Channel

Channel

Channel

Channel

 

 

Figure 2.This overhead view shows a typical home theater plan. Left/right rear channels are for a 7-channel system. Center rear channel is for a 6-channel system.

PLACEMENT

NOTE: The satellite speakers can be placed directly on a shelf using one of the three included shelf stands, or mounted on a wall using the included wall brackets. Optional floor stands and in-wall recess kits are also available. Please contact your dealer.

Left and Right Front Channels

For left and right front channels, place one satellite to the left and another to the right of the television, as shown in Figure 1. Since the speakers are magnetically shielded, you can place them very close to the TV without worrying about the magnetic field distorting the picture.

Surround Channels

For left and right surround channels, place one speaker on the left and another on the right, to the side of or slightly behind the listening area. The surround speakers should be mounted at a height of between 4 feet and 7 feet.

In 6- or 7-channel configurations, place the rear channel(s) behind the listening position, as shown in Figure 2.

4TSS-SAT4000

Page 4
Image 4
Infinity TSS-SAT4000 manual Planning Your System, Placement, Left and Right Front Channels, Surround Channels