Page 12
Turning the Monitor On/Off
1) Verify that the power cord is connected to a power outlet and that the power switch on the Boom Connector Panel is ON.
2) Press the Power buon located on either:
a. the remote
b. the right side of the monitor
c. or the back of the monitor on the PC box.
The front LED turns green.
3) Press the Power buon again to put the monitor into Standby. The front LED turns red. You can also put your monitor to sleep
using the keyboard. The front LED turns orange.
Notes:
If the monitor becomes locked and does not respond to normal power down procedures, the monitor can be powered down by
pressing and holding the PC box Power buon (located on the back of the monitor) for 7-8 seconds.
By default, this monitor will me out at 10 minutes and go into system standby aer 20 minutes of inacvity. Power sengs for the
monitor can be changed in Windows Control Panel> Hardware and Sound > Power Opons.