Page 6
Safety Considerations
Please read and follow all safety instrucons provided below and on the monitor before connecng the monitor to a power
source. Failure to comply with safety instrucons may result in re, electrical shock, or personal injury and may damage or
impair protecon provided by the equipment. Please save all safety instrucons.
• This monitor is very heavy and should be moved and installed by at least two individuals. Do not aempt to move or install the
monitor yourself, otherwise injury and/or damage may occur.
• When moving the monitor, always hold the monitor rmly using the side and boom bezels. Do not hold the top bezel.
• When moving the Monitor carton, do not lt or invert the carton. Always keep it in an upright orientaon.
• Disconnect all accessories and cables before moving the monitor.
• If the monitor is installed against the wall, maintain a distance of at least 1.98” (5cm) between the monitor and the wall to pro-
vide adequate venlaon.
• Refer to this guide for proper startup and shutdown procedures.
• Follow all warnings and cauons in this manual and on the monitor.
• Locate the monitor at least 4’ (1.2m) away from heang and cooling vents.
• Do not block venlaon openings. Locate the monitor in a well-venlated area without obstrucons to intake or exhaust vents.
• Do not install or use the monitor near any heat sources such as radiators, heat registers, stoves, or other devices (including ampli-
ers) that produce heat.
• Do not place the monitor in direct sunlight, humid, greasy or dusty places or in places where the monitor may come into contact
with rain, smoke or steam.
• The monitor should not be used with the power cord near water, for instance, near a bathtub, washbowl, kitchen sink or swim-
ming pool, etc.
• Do not use any components of the monitor near water. Warning: To reduce the risk of re or electric shock, do not expose this
equipment or any component of this equipment to rain or moisture.
• Do not drop the monitor.
• Do not spill liquid on the monitor. Spilled liquid may damage the monitor.
• WARNING: This apparatus must be securely aached to the oor/wall per installaon instrucons. Tipping, shaking, or rocking
the machine may cause injury or death.
• The power outlet used to power this product should be readliy accessible for fast disconnecon in case of emergency.
• No naked ame source, such as lighted candles, should be placed on the apparatus.
• Use the power cord provided. Connect the power cord to a receptacle with a protecve safety (earth) ground terminal. A surge-
protected power strip is recommended. Do not overload wall outlets.
• It is recommended that the Class 1 monitor be grounded.
• Do not install the monitor in places subject to mechanical vibraon.
• Do not place the monitor on an unstable surface, which could result in serious personal injuries and monitor damage. When
mounng the monitor to a stand, be sure to following the manufacturer’s instrucons. Use only the mounng hardware recom-
mended by the manufacturer.
• When disconnecng the power cord, hold the plug, not the cord.
• Protect the power cord from being walked on or pinched parcularly at plugs, convenience receptacles and the point where they
exit from the monitor.