T t i n g O j e c t o r | InFocus LP290 instruction

S e t t i n g	u p	t h e	P r o j e c t o r

NOTE: The USB mouse is supported for use with Windows 98 or higher only.

NOTE: You do not need to restart your computer after connecting a USB mouse to use it (it is hot- pluggable). You must restart your computer after plugging in a PS-2 mouse.

Do you want to control the computer’s mouse from the projector’s remote?

If your computer has a PS/2 connector, use the PS/2 mouse cable.

1Plug the green end of the PS/2 mouse cable into the mouse connector on your computer.

2Plug the black end of the PS/2 mouse cable into the “PS2/RS-232” connector on the projector.

If your computer has a USB connector and is running Windows 98, use the USB mouse cable.

1Plug the flat end of the USB mouse cable into the mouse con- nector on your computer.

2Plug the square end of the USB mouse cable into the “USB” connector on the projector.

You must have the appropriate USB drivers installed on your computer to use the USB feature. Windows 98 ships with the appropriate drivers.

Now you’re ready to power up the projector and your computer. Skip to “Powering up the Projector” on page 13.

10

Image 16

InFocus LP290 instruction manual T t i n g O j e c t o r

Contents

FCC Warning Canada Safety CertificationsEN 55022 Warning Declaration of Conformity Australian Certification C-tick mark Trademarks Table of Contents Appendix Index Safety Definitions Safety Symbols Safety InstructionsSafety Terms Customer Service Important Operating Considerations Image Resolution IntroductionLP280 LP290 Unpacking the Projector CompatibilityDiately if anything is missing Shipping box contents Rear view of projector Usage Guidelines If You Need Assistance Warranty Setting UP the Projector F t T t i n g O j e c t o r Connecting a Computer Do you want to play your computer’s audio on the projector? T t i n g O j e c t o r Connecting a Video Player T t i n g O j e c t o r Powering up the Projector Turning Off the Projector Basic Image Adjustment Using the ProjectorAdjusting the Projector I n g O j e c t o r Using the Remote Control Using the Keypad and Remote Buttons PowerMenu Source/Select keypad only or Computer and Video remote only Arrow buttons VolumeKeystone Black remote only Effect remote onlyContrast remote only Brightness remote only Using the On-Screen Menus Basic Menu ContrastBrightness Color Reset SetupAbout Setup menu Picture menu System menu Language menu Effect menu Service menu Userlogo menu Cleaning the Lens Maintenance & TroubleshootingCleaning the Dust Filters I n t e n a n c e Troubleshooting Replacing the Projection Lamp Replacing the Batteries in the Remote Control Using the Security Lock Problem The projector is not running TroubleshootingLEDs Problem Only the start-up screen displays Problem Color or text not being projectedProblem The screen resolution is not right Problem Image isn’t centered on the screen Problem Image is too wide or narrow for screen Problem Image is out of focusProblem Image and menus are reversed left to right Problem Projected image is distortedPage I n t e n a n c e Troubleshooting Specifications Appendix Accessories Standard Accessories Ship with the projector Part Number Optional Accessories HW-RF-REMLSR Portable and Laptop Activation Chart Key command to Computer Activate port De-activate port FN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using Video Mirroring with a PowerBook Computer Using SimulScan Projected Image Size Index Numerics D e Page D e Limited Warranty InFocus-Branded Products Warranty Limitation and Exclusion