Using the Projector, Basic Image Adjustment | InFocus LP290 instruction

USING THE PROJECTOR

This section describes how to use and make adjustments to the projector. It also provides a reference to the keypad and remote buttons and the options available from the on-screen menus.

Basic Image Adjustment

1Make sure you have powered up your equipment in the right order (page 13).

2If the image doesn’t display completely, zoom the image (page 15), adjust the height of the projector (page 16) or center the image by adjusting its horizontal or vertical position (page 24). Be sure the projector lens is at a 90 degree angle to the screen.

3If the image is out of focus, rotate the focus ring (page 15).

4If the colors don’t look right, adjust the brightness, contrast, tint, or color (page 22).

Adjusting the Projector

To focus the image, rotate the focus ring (Figure 8) until the image is clear. To zoom the image, rotate the zoom ring. This adjusts the image size.

zoom ring

focus ring

FIGURE 8

Focus ring and zoom ring

NOTE: To obtain the best overall focus quality, open the menu and focus on the text. This will ensure that the best overall image quality is achieved.

15

Image 21

InFocus LP290 instruction manual Using the Projector, Basic Image Adjustment, Adjusting the Projector

Contents

Safety Certifications FCC Warning CanadaEN 55022 Warning Australian Certification C-tick mark Trademarks Declaration of Conformity Table of Contents Index Appendix Safety Instructions Safety Definitions Safety SymbolsSafety Terms Important Operating Considerations Customer Service Introduction Image ResolutionLP280 LP290 Compatibility Unpacking the ProjectorDiately if anything is missing Shipping box contents Rear view of projector If You Need Assistance Usage Guidelines Warranty F t Setting UP the Projector T t i n g O j e c t o r Do you want to play your computer’s audio on the projector? Connecting a Computer T t i n g O j e c t o r Connecting a Video Player T t i n g O j e c t o r Powering up the Projector Turning Off the Projector Using the Projector Basic Image AdjustmentAdjusting the Projector I n g O j e c t o r Using the Remote Control Power Using the Keypad and Remote ButtonsMenu Source/Select keypad only or Computer and Video remote only Volume Arrow buttonsKeystone Effect remote only Black remote onlyContrast remote only Brightness remote only Using the On-Screen Menus Contrast Basic MenuBrightness Color Setup ResetAbout Picture menu Setup menu System menu Effect menu Language menu Service menu Userlogo menu Maintenance & Troubleshooting Cleaning the LensCleaning the Dust Filters I n t e n a n c e Troubleshooting Replacing the Projection Lamp Replacing the Batteries in the Remote Control Using the Security Lock Troubleshooting Problem The projector is not runningLEDs Problem Color or text not being projected Problem Only the start-up screen displaysProblem The screen resolution is not right Problem Image isn’t centered on the screen Problem Image is out of focus Problem Image is too wide or narrow for screenProblem Image and menus are reversed left to right Problem Projected image is distortedPage I n t e n a n c e Troubleshooting Appendix Specifications Standard Accessories Ship with the projector Part Number Accessories HW-RF-REMLSR Optional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation Chart FN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using SimulScan Using Video Mirroring with a PowerBook Computer Projected Image Size Numerics Index D e Page D e InFocus-Branded Products Limited Warranty Warranty Limitation and Exclusion