Introduction, Image Resolution, LP280 | InFocus LP290 specification

INTRODUCTION

The InFocus® LP280™ and LP290™ multimedia projectors are specifically designed for multipurpose use. They are easy to con- nect, easy to use, easy to transport, and easy to maintain. The LP280 has native SVGA 800x600 resolution, the LP290 has XGA 1024x768 resolution. The user interfaces of the two products are identical; information in this user’s guide applies to both prod- ucts.

Image Resolution

LP280

The SVGA resolution of the LP280’s projected image is 800x600. The projector is compatible with screen resolutions up to 1280x1024. If your computer’s screen resolution is higher than 1280x1024, reset it to a lower resolution before you connect the projector.

LP290

The XGA resolution of the LP290’s projected image is 1024x768. The projector is compatible with screen resolutions up to 1280x1024. If your computer’s screen resolution is higher than 1280x1024, reset it to a lower resolution before you connect the projector.

NOTE: The LP280 automatically

expands 640x480 images to

800x600.

NOTE: The LP290 automatically

expands 640x480 and 800x600

images to 1024x768.

1

Image 7

InFocus LP290 instruction manual Introduction, Image Resolution, LP280

Contents

FCC Warning Canada Safety CertificationsEN 55022 Warning Australian Certification C-tick mark Trademarks Declaration of Conformity Table of Contents Index Appendix Safety Definitions Safety Symbols Safety InstructionsSafety Terms Important Operating Considerations Customer Service LP290 Image ResolutionIntroduction LP280 Unpacking the Projector CompatibilityDiately if anything is missing Shipping box contents Rear view of projector If You Need Assistance Usage Guidelines Warranty F t Setting UP the Projector T t i n g O j e c t o r Do you want to play your computer’s audio on the projector? Connecting a Computer T t i n g O j e c t o r Connecting a Video Player T t i n g O j e c t o r Powering up the Projector Turning Off the Projector Basic Image Adjustment Using the ProjectorAdjusting the Projector I n g O j e c t o r Using the Remote Control Source/Select keypad only or Computer and Video remote only Using the Keypad and Remote ButtonsPower Menu Arrow buttons VolumeKeystone Brightness remote only Black remote onlyEffect remote only Contrast remote only Using the On-Screen Menus Color Basic MenuContrast Brightness Reset SetupAbout Picture menu Setup menu System menu Effect menu Language menu Service menu Userlogo menu Cleaning the Lens Maintenance & TroubleshootingCleaning the Dust Filters I n t e n a n c e Troubleshooting Replacing the Projection Lamp Replacing the Batteries in the Remote Control Using the Security Lock Problem The projector is not running TroubleshootingLEDs Problem Image isn’t centered on the screen Problem Only the start-up screen displaysProblem Color or text not being projected Problem The screen resolution is not right Problem Projected image is distorted Problem Image is too wide or narrow for screenProblem Image is out of focus Problem Image and menus are reversed left to rightPage I n t e n a n c e Troubleshooting Appendix Specifications Standard Accessories Ship with the projector Part Number Accessories HW-RF-REMLSR Optional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation Chart FN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using SimulScan Using Video Mirroring with a PowerBook Computer Projected Image Size Numerics Index D e Page D e InFocus-Branded Products Limited Warranty Warranty Limitation and Exclusion