Using Video Mirroring with a PowerBook Computer | InFocus LP290

Using Video Mirroring with a PowerBook Computer

When you turn video mirroring (called SimulScan in newer Pow- erBooks—see below) on, the projector displays the same informa- tion that appears on your PowerBook’s built-in screen. When video mirroring is off, the projector acts like a separate display.

To turn on video mirroring for the first time:

1Open the Monitors control panel; click on Monitor 2.

2Set the number of colors you want.

3Open the Control Strip, then click on the monitor icon.

4Select “Turn Video Mirroring On.”

Now you can turn video mirroring on and off from the Control Strip without having to open the Monitors control panel again.

When using video mirroring and high color graphics such as slide shows, the projected image occasionally might turn black and white. If this happens, perform the following steps:

1Turn off video mirroring.

2Open the Monitors control panel.

3Move the white menu bar to Monitor 2 to set the projector as the primary monitor.

4Restart the PowerBook.

Using SimulScan

Some newer PowerBooks display images on an external monitor or projector differently than previous ones. When using SimulScan, the projector displays the same information that appears on your PowerBook

To select SimulScan:

1Open the Control Panel, then double-click Monitors and Sound.

2In the Resolution list, choose the SimulScan mode, then click OK.

3If this changes your display settings, a dialog box appears. Click OK to confirm the change.

47

Image 53

InFocus LP290 instruction manual Using Video Mirroring with a PowerBook Computer, Using SimulScan

Contents

EN 55022 Warning Safety CertificationsFCC Warning Canada Australian Certification C-tick mark Trademarks Declaration of Conformity Table of Contents Index Appendix Safety Terms Safety InstructionsSafety Definitions Safety Symbols Important Operating Considerations Customer Service Introduction Image ResolutionLP280 LP290 Diately if anything is missing CompatibilityUnpacking the Projector Shipping box contents Rear view of projector If You Need Assistance Usage Guidelines Warranty F t Setting UP the Projector T t i n g O j e c t o r Do you want to play your computer’s audio on the projector? Connecting a Computer T t i n g O j e c t o r Connecting a Video Player T t i n g O j e c t o r Powering up the Projector Turning Off the Projector Adjusting the Projector Using the ProjectorBasic Image Adjustment I n g O j e c t o r Using the Remote Control Power Using the Keypad and Remote ButtonsMenu Source/Select keypad only or Computer and Video remote only Keystone VolumeArrow buttons Effect remote only Black remote onlyContrast remote only Brightness remote only Using the On-Screen Menus Contrast Basic MenuBrightness Color About SetupReset Picture menu Setup menu System menu Effect menu Language menu Service menu Userlogo menu Cleaning the Dust Filters Maintenance & TroubleshootingCleaning the Lens I n t e n a n c e Troubleshooting Replacing the Projection Lamp Replacing the Batteries in the Remote Control Using the Security Lock LEDs TroubleshootingProblem The projector is not running Problem Color or text not being projected Problem Only the start-up screen displaysProblem The screen resolution is not right Problem Image isn’t centered on the screen Problem Image is out of focus Problem Image is too wide or narrow for screenProblem Image and menus are reversed left to right Problem Projected image is distortedPage I n t e n a n c e Troubleshooting Appendix Specifications Standard Accessories Ship with the projector Part Number Accessories HW-RF-REMLSR Optional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation Chart FN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using SimulScan Using Video Mirroring with a PowerBook Computer Projected Image Size Numerics Index D e Page D e InFocus-Branded Products Limited Warranty Warranty Limitation and Exclusion