SETTING UP THE PROJECTOR
1Place the projector on a flat surface.
•The projector must be within 10 feet (3 m) of your power source and within 8 feet (2.4 m) of your computer.
•If you want to project from behind a translucent screen, set up the projector behind your screen. See “Rear Projection” on page 32 to reverse the image.
•If you are installing the projector on the ceiling, refer to the LP755 Ceiling Mount Installation Guide that comes with the Ceiling Mount Kit for more information. To turn the image upside down, see “Ceiling Projection” on page 32. The Ceil- ing Mount Kit is sold separately; see page 52.
2Position the projector the desired distance from the screen.
•The distance from the lens of the projector to the screen determines the size of the projected image. Figure 3 shows three projected image sizes using the lens at maximum zoom. For more information about image size, see “Pro- jected Image Size” on page 58.
3Make sure the projector and your computer are turned off.
| 1 |
| 9 |
| . |
| 2 |
| f |
| t |
| . |
| 6 |
| . |
| 4 |
| f |
2 | t |
. | |
. |
|
6 |
|
f |
|
t |
|
. |
|
| 30 ft. |
4 ft. | 10 ft. |
|
NOTE: An optional extension cable, sold separately, lets you increase the distance between the projector and your computer to 68 feet (21 m). See “Optional Accessories” on page 52.
FIGURE 3
Projected image size (maximum zoom)
5
