S e t t i n g | u p | t h e | P r o j e c t o r |
|
|
|
|
CAUTION: Turn off the computer, monitor and projector whenever you connect or disconnect cables.
NOTE: The LP755 is optimized for use with newer CableWizards (2 and 3). If you have a CableWizard 1 from older models of InFocus projectors, we do not recommend using it as image quality is reduced. The label on the bottom reads CableWizard or CableWizard II or CableWizard3.
Connecting the CableWizard™3 to the Projector
The CableWizard3 (referred to as “CableWizard” in this manual for brevity) simplifies the connection process by providing a cen- tral hub for all the connections between the projector and your computer. The connectors on the CableWizard are labeled with icons. The CableWizard also has an LED that lights solid green when the projector is on and CableWizard is functioning prop- erly. A slowly blinking LED indicates CableWizard is waiting to initialize with the projector; a rapidly blinking LED indicates a problem with CableWizard.
Connect the 
end of the CableWizard cable to the 
connector on the projector’s connector panel (Figure 4).
FIGURE 4
Connecting the CableWizard to the projector
6
