S e t t i n g | u p | t h e | P r o j e c t o r |
|
|
|
|
NOTE: With some computers, the order in which you power up the equipment is very important. Most computers should be turned on last, after all other peripherals have been turned on. Refer to your
computer’s documentation to determine the correct order.
NOTE: The first time you connect your computer to the projector, the computer may display a message stating that new hardware was found. The Add New Hardware Wizard may appear. Use the Wizard to load the correct driver (the computer considers the projector a Plug and Play Monitor).
CAUTION: When you disconnect the projector after you have turned it off, always remove the power cord from the electrical outlet first, then remove it from the
projector.
•If you don’t want to hear the sound from your video player, press the mute button.
5If you connected any external speakers, turn them on.
6If you connected your monitor, turn it on.
7If you connected your computer, turn it on.
•The computer image should display on the projection screen. (If a video source is active, press the comp button to display your computer’s image.)
•If necessary, use the brightness buttons on the keypad to adjust the brightness. You can make further adjustments to the image from the projector’s
•If you don’t want to hear the sound from your computer, press the mute button.
Turning Off the Projector
If you want to turn off the projector for a short period of time, press the standby button on the remote or keypad. The Standby LED on the keypad lights solid green. This blanks the screen for 15 minutes, but keeps the projector running. After 15 minutes, the projector turns off. You must press the power button to restart. To exit standby mode, press the standby button again. The Standby LED goes out. You can change the amount of time the projector stays in standby mode; see “Standby Time” on page 31.
To turn off the lamp, press the power button on the remote or key- pad.
If you want to turn the lamp back on, we recommend waiting 30 seconds.
16
